Shenzhen Yongjunyi Technology Co., Ltd.
IP65 Dustproof White 23.8 Inch Industrial Touch Panel PC 16:9 Full HD 10-Point Multi Touch Integrated X86 Control Machine, Equipped With Intel Celeron J1900 Chip, Compatible With Multiple Industrial Operating Systems, Customized 13.3 15.6 21.5 Inch Screen Sizes Available
This integrated control equipment, the 23.8 inch industrial panel PC, adopts all-white metal outer shell and IP65 front protection layer to block water splashes and fine dust particles. It integrates display screen, multi-touch module and industrial mainboard into one body, suitable for food production lines, chemical workshops, commercial self-service terminals and other humid and dusty working scenes. We provide diversified size customization service, and alternative screen sizes including 13.3 inch, 15.6 inch and 21.5 inch can be produced according to project installation limits.
16:9 FHD IP65 Protective Industrial Display Screen
This industrial panel PC is fitted with long-life LED backlight screen, standard 16:9 wide proportion and 1920*1080 full HD native resolution, with screen brightness stably maintained above 300cd per square meter. The color gamut reaches 16.7 million true colors, and the screen response speed is controlled within 5ms to avoid ghosting during frequent touch operation. Horizontal 170° and vertical 160° ultra-wide viewing angle ensures clear content display from all installation angles, and the backlight can continuously work for more than 50000 hours without frequent replacement.
Industrial Grade 10-Point Capacitive Multi-Touch Module
The front touch layer supports ten-point simultaneous touch operation, which can realize picture zoom, drag and multi-point linkage control actions required by industrial software. The touch reaction speed is less than 5ms, and it can normally identify touch signals when the identification thickness is over 1.5mm. Two types of high-speed USB 2.0 and USB 3.0 transmission interfaces are reserved for touch signal transmission, with strong anti-interference ability to adapt to complex workshop electromagnetic environment.
Stable X86 J1900 Industrial Mainboard Matching Scheme
The core operation part of this 23.8 inch industrial panel PC takes Intel Celeron J1900 dual-core chip as the standard operation processor. Memory capacity supports optional configuration of 2G, 4G, 8G and 16G DDR3, while solid state hard disk has multiple capacity options of 64G, 128G, 256G and 500G. Built-in integrated display chip can output 720P and 1080P high-definition images at the same time, smoothly running various industrial monitoring and touch control software.
Cross-Platform Operating System Compatibility & Dual Network Design
The touch all-in-one machine supports mainstream multi-touch operating systems including Win7, Win8, Win10, Android and Linux, which can meet the operation requirements of different industrial control software. It is equipped with gigabit adaptive wired network card and dual-band wireless WiFi module complying with 802.11a/b/g/n standard, which can realize stable on-site data uploading and remote equipment monitoring.
23.8 Inch Industrial Panel PC with Rich Reserved Interfaces & Wide Voltage Energy Saving Power Supply System
The metal casing reserves abundant universal external connection ports, covering VGA, HDMI video input, built-in loudspeaker, earphone audio port, RJ45 network port and four independent USB interfaces, which can be connected with card readers, printers, sensors and other peripheral equipment. It supports 110-220V wide voltage alternating current input, stable 12V 5A direct current output, total power consumption lower than 220W and standby power consumption controlled below 3W, low heat generation and energy saving for long-time continuous operation.
| waterproof 23.8″ Industrial Panel PC with Touchscreen for Factory Automation | |
| Panel | |
|
LED Backlight |
|
| Screen Size |
23.8 inch (16:9) |
| Viewing Angle: |
(H:170° V:160°) |
| Viewing Area: |
293.76(H)×165.24(V) |
| Resolution: |
1920×1080 |
| Brightness |
≥ 300/m2 |
| Color: |
16.7M(8-bit 2(LVDS) |
| Response Time: |
< 5ms |
| Touch panel | |
| Touch Mode: |
10 points Multi-Touch Capacitive Touch Screen |
| Quantity of Touch Point: | Standard Configuration: 10 Touch Points, enlarging and shrinking images is availablle, it also supports multi-touch. |
| Response Time | < 5ms |
| Touch Identification Validity: | > 1.5mm |
| Communication Code: | High Speed USB 2.0, 3.0 |
| Parameters of Computer | |
| Solution Type | X86 |
| chip | Intel Celeron,Dual Core Processor J1900 |
| RAM | DDR3 4G( 2G, 8G, 16G optional) |
| Hard Disk | SSD 64G 128G, 256G 500G optional |
| Display card | Integrated Display Card |
| Definition | 1920P/1080P |
| Operation System(Multi-touch System) | Multi-touch System: Windows 7/ Windows 8/Windows 10/ Android/Linux |
| Network Adapter | Integrated10/100/1000M auto-adaptive Network Card( 10/100/1000M), Wireless Network Card 802.11a/b/g/n( 802.11a/b/g/n) |
| Overall Power Consumption | <220W |
| Standby Power Consumption | <3W |
| Power supply input | 220V AC 50/60Hz |
| Parameters of Display | |
| Power Supply Interface: | 12V |
| Interface inputs | VGA, HD MI, Speakers, Earphone, Audio, RJ45, 4USB, |
| Power supply parameters | |
| Input Power Supply: | 110-220V AC 50/60Hz |
| Output Power Supply: | 12V 5A |
| Overall Power Consumption | <220W |
| Standby Power Consumption | <3W |
| Working Life: | > 50000 Hours |
| Refresh Frequency: | 60Ghz |
Related Products：Office Home Computer
Learn More About IPC Industrial Computer Standards：Global Electronics Association
