Shenzhen Yongjunyi Technology Co., Ltd.
4:3 Standard Screen Fanless 19 Inch Industrial Panel PC 10-Point Capacitive Touch Integrated X86 All In One Computer, Optional Intel J1900 I3 I5 I7 Processor, Windows Linux Dual System Support, Customizable 15 Polegadas & 17 Inch Screen Sizes
This fanless integrated 19 inch industrial panel PC adopts passive heat dissipation without cooling fans, effectively avoiding dust accumulation and fan failure under long-time continuous operation. Classic 4:3 screen ratio fits traditional industrial control cabinets, widely used in equipment control stations, production monitoring consoles and embedded automation terminals. We support size customization service for 15 inch and 17 inch alternative screens to match different cabinet installation dimensions.
4:3 Standard Industrial LED Display Module
Equipped with long service LED backlight panel, this 19 inch industrial panel PC adopts classic 4:3 industrial ratio and native 1280*1024 resolution with stable 300cd/m² brightness. It reproduces 16.7 million rich true colors and screen response time less than 5ms to eliminate image ghosting during frequent touch operations. The viewing angle reaches 85° horizontal and 80° vertical, ensuring clear content display from front and side operating positions, and backlight service life exceeds 50000 hours to reduce equipment maintenance cycles.
Industrial Grade 10-Point Capacitive Multi Touch Screen
The built-in touch sensing component supports ten simultaneous touch points, realizing common operation gestures such as picture zoom, shrink and multi-point linkage required by industrial control software. Touch response speed is controlled below 5ms, and it can accurately identify touch signals with thickness over 1.5mm. High-speed USB 2.0 and USB 3.0 transmission ports provide stable touch signal output, with strong anti-interference ability to adapt to dusty and slightly vibrating factory environments.
Upgradeable X86 Multi-Grade Processor Hardware Configuration
The core computing hardware takes Intel Celeron J1900 dual-core chip as standard configuration, buyers can upgrade to i3, i5 or i7 processors according to high operation performance demands. Memory supports optional DDR3 specifications of 2G, 4G, 8G and 16G, while solid state hard disk provides multiple capacity options of 32G, 64G, 128G and 256G. Onboard integrated graphics chip can stably output 720P and 1080P high-definition images to smoothly run industrial monitoring and touch interaction software.
19 inch industrial panel PC With Full Operating System Compatibility & Wired Wireless Dual Network
Compatible with mainstream multi-touch operating systems Win7, Win8, Win10, Android and Linux, this industrial panel PC also supports XP, CE and MAC single-touch systems for old equipment renovation. Built-in gigabit self-adaptive wired network card and 802.11a/b/g/n wireless WiFi module realize stable on-site data collection and remote online equipment monitoring.
Complete External Interfaces & Wide Voltage Energy Saving Power Supply
The metal casing reserves full set of universal external connection ports including VGA, HDMI video input, built-in speakers, earphone audio jack, RJ45 network port and four independent USB ports, which can be matched with card readers, printers, sensors and other peripheral equipment. It supports 110-220V wide voltage alternating current input and stable 12V 5A direct current output, overall power consumption lower than 220W and standby power consumption controlled below 3W, meeting low heat and energy-saving operation requirements of fanless industrial equipment.
| 19 computador industrial tudo num só de polegadas | |
| Painel | |
|
Retroiluminação LED |
|
| Tamanho do Ecrã |
19polegadas (4:3) |
| Ângulo de Visualização: |
85/85/80/80 (Tipo)(CR≥10) |
| Área de Visualização: |
376.32×301,056 mm (H×V) |
| Resolução: |
1280×1024 |
| Brilho |
300/m2 |
| Cor: |
16.7M(8-bit 2(LVDS) |
| Tempo de Resposta: |
< 5ms |
| Painel tátil | |
| Modo de Toque: |
10 Ecrã Tátil Capacitivo Multi-Touch |
| Quantidade de Pontos de Toque: | Configuração Padrão: 10 Pontos de Toque, é possível ampliar e reduzir imagens, suporta também multi-toque. |
| Tempo de Resposta | < 5ms |
| Validade de Identificação de Toque: | > 1.5mm |
| Código de Comunicação: | USB de Alta Velocidade 2.0, 3.0 |
| Parâmetros do Computador | |
| Tipo de Solução | X86 |
| chip | Intel celeron J1900( i3 i5 i7 opcional) |
| RAM | DDR3 4G( 2G, 8G, 16G opcional) |
| Disco Rígido | SSD 64G( 32G, 128G, 256G opcional) |
| Placa Gráfica | Placa de vídeo integrada |
| Definição | 720P/1080P |
| Sistema Operativo(Sistema multi-toque) | Win7/Win8/Win10/Android/LinuxSistema de toque único: XP/CE/MAC |
| Adaptador de rede | Placa de rede integrada 10/100/1000M auto-adaptável( 10/100/1000M), Placa de rede sem fios 802.11a/b/g/n( 802.11a/b/g/n) |
| Consumo total de energia | <220W |
| Consumo de energia em standby | <3W |
| Entrada de alimentação | 220V AC 50/60Hz |
| Parâmetros do ecrã | |
| Interface da fonte de alimentação: | 12V |
| Entradas de Interface | VGA, HD MI, Altifalantes, Auscultadores, Áudio, RJ45, 4USB, |
| Parâmetros da fonte de alimentação | |
| Fonte de alimentação de entrada: | 110-220V AC 50/60Hz |
| Fonte de alimentação de saída: | 12V 5A |
| Consumo total de energia | <220W |
| Consumo de energia em standby | <3W |
| Vida útil: | > 50000 Horas |
| Frequência de atualização: | 60Ghz |
Produtos Relacionados：Office Home Computer
Learn More About IPC Industrial Computer Standards：Global Electronics Association
